Instructions for Use
19
•
It is recommendet to remove the frost
layer when it is 3 to 5 mm thick.
•
Before loading the appliance with
packages of fresh foods, make sure they
are cooled to ambient temperature
(except for the soup).
•
If the termostat knob is set towards
max
(6)
, do not forget turn it towards
min (1)
if intensive cooling is no more
necessary.
•
If the gasket is damaged or if it turns out
that the sealing is poor, the energy
consumption is substantially higher. To
restore efficiency, replace the gasket.
•
The condenser on the rear wall should
be always clean, free of dust or any
impurities.
•
Always consider instructions stated in
sections Positioning and Energy Saving
Tips, otherwise the energy consumption
is substantially higher.
Important
•
If you have purchased a new appliance to
replace an old one which is equipped with
a lock that cannot be opened from inside
(lock, bolt), take care that the lock is made
unfit. In this way you will reduce a risk of
children getting in danger of being
suffocated in the cell.
•
Mind to connect the appliance correctly to
the mains supply.
•
During the operation do not touch the
cooled surfaces of the appliance,
especially not if your hands are wet,
because the skin might stick to these very
cold surfaces.
•
Do not freeze up bottled drinks, especially
not fizzy ones such as mineral water,
sparkling wine, beer, cola etc., because
the liquid expands when freezing and the
glass bottle may explode.
•
Avoid to eat frozen food (bread, fruit,
vegetables), because you can get frost
burns.
•
Carefully check the foods for color and
smell and if you are in doubt about their
quality, throw them away because they
may be dangerous for eating.
•
You must disconnect the appliance from
the mains in the following cases:
−
before the repair (only a qualified
technician should repair it),
−
before cleaning,
−
before replacement of the light bulb.
•
Do not defrost the appliance by means of
electric appliances (hair dryer etc.) and do
not scrap the frost layer with sharp tools.
Use only enclosed tools or tools
recommended by the manufacturer.
•
For the sake of environment protection -
be careful not to damage the rear wall of
the appliance (the condenser unit or the
tubes - for example when moving the
appliance) or any part of the refrigerating
system inside the appliance.
•
The refrigerating system of the appliance
is filled with refrigerant and oil, so when the
appliance is damaged, handle it with care
and dispose it of in compliance with
environmental protecting precautions. (See
We Care for the Environment).
•
If the supply cord is damaged, it must be
replaced by the manufacturer or his
service agent or a qualified person in order
to avoid hazard.
•
The rating plate is placed in the interior
wall or on the back of the appliance.
The symbol on the product or on its
packaging indicates that this product
may not be treated as household
waste. Instead it shall be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of
thisproduct. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Downloaded from Fridge-Manual.com Manuals
