26
It is important to note that the appliance will
have to be inspected by a qualified technician
before using it again.
ATTENTION!
Do not run the appliance for more
than 20 hours in one single use. After 20 hours,
press the “Start/Reset” button twice. Unplug and let
it cool down for at least 2 hours before operating
again.
Do not operate near gas spray cans.
Incorrect operation and improper handling
can lead to malfunction of the appliance and
injuries to the user.
The power cord can not be squeezed by
something heavy or sharp, otherwise it will
cause a fire or electric shock.
The temperature of accessible surface may
be
HIGH
when the appliance is operating.
FEATURE OF DEHYDRATOR
This unit features an automatic fan which
circulates warm air to ensure even drying! Dried
foods make a great snack because they retain
nearly all of their nutritional value and flavour.
-Perfect way to preserve fruit, snacks, vegetables,
bread, flowers and more.
-
Adjustable trays: five easily stackable trays.
- Trays are easy to clean.
-
Sophisticated rounded design.
-
Transparent trays allow you to check the food
status.
BEFORE USE:
Cleaning:
Before using the appliance for the first time, wipe
all parts of the appliance. Clean the 5 trays with a
lightly moistened cloth. Use detergent as needed.
Do not wash the BASE in a dishwasher or
immerse it in water or any other liquid!!!
After cleaning, the unit must be run in for 30
minutes. Do not place any food in the dehydrator
during this period.
Any smoke or smells
produced during this procedure are normal.
Please ensure sufficient ventilation.
After the
run in period, rinse the racks in water and dry all
parts. This procedure is only necessary before
using a new appliance for the first time.
(DO NOT
WASH THE BASE!!!)
Unplug the dehydrator from the power supply and
let it cool down before cleaning. Use a soft brush
to remove any food stuck to the surface. Dry all
parts before storing the dehydrator.
Do not clean the appliance with aggressive
chemicals or abrasives as this may damage the
surface.
ASSEMBLING THE APPLIANCE:
Make sure that the dehydrator sits steadily on a
solid, level surface. Stack the drying trays and
connect the plug into a wall socket. The height of
dehydrator can be increased from 306 mm to 395
mm by turning the upper trays into the clips for
lower ones, which makes it possible to dry larger
chunks food. The dehydrator is now ready for use.
USING THE APPLIANCE
1. Put clean food onto the trays. Do not overload
the trays and make sure particular chinks of food
do not overlap. Close the cover.
Note: always start loading the food from the
bottom tray to the top tray.
2. Plug the dehydrator into a wall outlet. There is a
beep sound at the beginning when it starts up.
The LED screen will show default time setting
“10:00” and temp setting “70°C”. When it switches
to standby mode, the signal “:” between the time
figures (hours and minutes) does not flash.
3. When the dehydrator is in the standby mode,
press the “TIMER” button to display the time on
LED screen. Use
“+" or "-" button to change the
drying time accordingly, setting it to a value
between "0:30” and “19:30". Press "+" or "-" button
once; the time increment or decrement is 30
minute/press. If you press and hold the "+" or "-"
button for a long time, the setting will increase or
decrease continuously. 3 seconds after finishing
with the drying time settings, the system will
automatically switch to standby mode in the
current time setup.
4. When the appliance is in the standby mode,
press the “TEMP” button and LED screen will
display the temperature. Use the "+" or "-" button
to change the drying temperature as needed
between "35
°C” and “70°C ". Each time you press
"+" or "-", temperature will change by 5
°C. If you
press and hold the "+" or "-" button, temperature
setting will be increased or decreased
continuously. 3 seconds after the drying
temperature is set, the system automatically
confirms operation with the current temperature
setup. LED screen will display the time in standby
mode.
Note: Set low temperature for thin/small pieces of
food or for a small load of food. Set high
temperature for drying thick/big pieces of food and
large loads. The thermostat can also be used to
decrease the temperature as the food is near the
end of its drying cycle, which makes it easier to
control the final moisture level in the food.
5. After setting time and temperature, press the
“Start/Reset” button, Motor and fan will start first;
the heating element will start to operate 5 seconds
later. Set time begins to count down;
the signal “:”
on the LED screen flashes.
Содержание FDK500GCW
Страница 3: ...3 ...
