Gorenje ECT6SY2B, Инструкция по эксплуатации

Страница: 22 / 28

436556
be installed no less than 60 millimeters from the lower
surface of the worktop. The space between the partition
wall and the hob must be empty; no objects should be
placed into that gap.
• On the furniture back wall there should be a cutout with
width of at least 175 mm along the entire width of the
furniture element.
• Only type EVP4..,EVP2.., ovens fi tted with a cooling fan
may be installed underneath this cooking hob.
Installation procedure
• The worktop should be installed completely horizontally.
• The cutoff surfaces should be appropriately protected.
• Attach the fastening elements (4x - SVK6…600 mm; 6x
- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied
screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x -
SVK8…850 mm) to the left and right wall of the cooking
hob and the worktop cutoff .
• Connect the cooking hob to the power mains (see
instructions for connecting a cooking hob on a power
network).
• Insert the cooking hob into he cutoff and press it heavily
from above against the worktop.
• For screwing down the fi xing clip it is not allowed to
use screws longer than 6,5 mm.
22