background image

436556

Activating the cooking zone expansion

•  For a selected cooking one (a decimal point is lit next to 

the display for the currently selected zone), an additional 
heating coil can be activated by pressing the (J) sensor key. 
The signal light (E) next to the display will light up.

•  Select the cooking zone for both heating coils. 
•  If a cooking zone also features a third heating coil, this can 

also be engaged by pressing the (J) sensor key once again.  

Deactivating the additional heating coil

•  Select the cooking zone (a decimal point is lit next to 

the display for the currently selected zone).

•  Additional heating coil may be deactivated by pressing 

the (J) sensor key for the selected cooking zone several 
times.

For improved safety, your cooking hob is fi tted with 
a device that limits the duration of the cooking hob 
operation for each cooking zone respectively. The duration 
of operation is measured from the last change made to 
the power level settings for a particular cooking zone. If 
the power level is not changed for a while, the cooking 
zone will automatically be switched off  after a certain 
period of time which depends on the power level (the 
higher the power level, the shorter the duration – see table 
below).

Cooking zone 
expansion
(depending on the 
model)   

Operation time limit

Power level

u

1

2

3

4

5

6

7

8

9

Maximum operation time in 
hours

6

6

6

5

5

4

1,5

1,5

1,5

1,5

The STOP & GO function enables you to temporarily 
suspend, or pause the cooking progress (urgent other 
tasks), while keeping all the settings. 

Engaging the STOP & GO function 

•  Cooing is temporarily suspended by touching the STOP & 

GO (C) sensor key. 

•  A signal light (C1) will light up above the sensor key. 
•  All settings are frozen, and the cooking zones do not 

operate. The letters S, t, O, and P are indicated alternately 
on the display. 

Resuming the cooking progress

•  The cooking hob will continue to operate when the STOP & 

GO (C) sensor key is pressed again. 

•  Signal light (C1) goes off . 

Temporary cooking 
progress suspension - 
STOP & GO
(depending on the 
model)   

15

Содержание ECT6SY2B





























Отзывы: