INSTALLATION INSTRUCTIONS
Flush fitting
The oven can be installed under a work top or in a cooking column. Picture shows the installation
dimensions. Make sure that surrounding materials are heat resistant. Align the oven centrally with
respect to the side walls of the units surrounding it and fix it in place with the screws and Allen
screws provided.
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply, make sure that:
- The supply voltage corresponds to the specifications on the data plate on the front of the oven.
- The mains supply has an efficient earth (ground) connection complying with all applicable laws
and regulations. Correct earthing (grounding) is a legal requirement.
The power cable should never reach a temperature 50
°C above ambient temperature at any point
along its length.
If a fixed appliance is not provided with a power cable and plug, or some other device permitting it
to be disconnected from the mains electricity supply, with a gap between the contacts big enough
to guarantee class III
overvoltage protection, then such a device must be fitted to the power
supply in compliance with the regulations governing electrical installations. The socket or switch
must be easily reachable with the oven fully installed.
CABLE TYPES AND MINIMAL DIAMETERS
SASO
H05RR-F 3x1,5 mm
2
H05RR-F 3x2,5 mm
2
H05VV-F 3x1,5 mm
2
H05VV-F 3x2,5 mm
2
H05RN-F 3x1,5 mm
2
H05RN-F 3x2,5 mm
2
H05V2V2-F 3x1,5 mm
2
H05V2V2-F 3x2,5 mm
2
N.B. The manufacturer declines all responsibility for damage or injury if the above instructions and
normal safety precautions are not respected.
