Gorenje BLG71112, Инструкция по эксплуатации

Страница: 10 / 16

237280
• Open the dryer door by pushing the left-hand side of the door
towards the appliance.
• Remove the laundry from the dryer.
• Turn the appliance off by turning the jog selector (A) to the
position “0”.
• Clean the lint fi lter (see chapter on Cleaning and
Maintenance).
• Close the dryer door.
• Empty the water container (this applies for condensation
dryers only - see Cleaning and Maintenance) and replace it
back to its slot.
• Pull the power lead from the socket, disconnecting the
appliance from the mains.
• By the user
After drying be careful when extracting laundry from
the appliance, as it may be hot!
Suspending the operation by pressing the START/PAUSE
button.
In case you press the START/ PAUSE button (D) during the
drying procedure, the drying program is suspended, and with the
next press of the same button the program is resumed where it
had been interrupted.
Changing the program or functions
If you wish to change the drying time or alter the selection of
additional functions during the progress of a drying program,
observe the following procedure:
• rotate the (A) button to position “0” (for approximately one
second). Set the new drying time or additional functions and
con
fi rm the new settings by pressing the START/PAUSE (D)
button.
Door opened
If the door is opened during the drying process this will pause the
operation (the (E) LED
fl ashes intermittently). The drying process
is resumed by closing the door and pressing the START /PAUSE
button (D) from the point where it had been interrupted.
• Power failure
If a power failure occurs during the operation of the dryer, this
requires that drying time is reset again, and all extra functions
are reselected (LED E
fl ashes as at the commencement of the
program).
Interruptions Interruptions
10