Gorenje BG6 A Series, Инструкция по эксплуатации

Страница: 21 / 28

EN 21
CONVERSION INSTRUCTION
Converting nozzles
Please note: disconnect the appliance from the power supply.
Prevent damage of the worktop. Lay down parts of the appliance
on a protected base.
For converting to a different type of gas, the nozzles have to be changed.
The values are also marked on the nozzle.
1. Remove pan supports, burner heads, crowns and covers (see pictures A1 and A2).
Pull off the control knobs vertically.
2. Use the socket (T1) or open end spanner (T4) to remove the old nozzles and place the new
nozzles inside the burner cups (see pictures A1 and A2).
A1 A2
1
2
T1
T4
Converting by-pass screws
Depending on the gas type to which the appliances will be converted, there are two ways to adjust
the by-pass screws.
Please check the conversion table in the column “Modification” if the by-pass screws have to be
screwed completely in (see action 3A), replaced by a different by-pass screw (see action 3B) or
adjusted (see action 3C).
The values are also indicated on the top of the by-pass screws. The by-pass screws can be
reached from the top of the hob when the knobs are removed (B2).