Instructions for use, installation and connection
90
Broaching
(certain models only)
•
Broaching set includes the revolving spike with removable
handle, and two forks with screws for securing the roast.
•
To use the broach, first insert the special support in the
fourth guide from below.
•
Pierce the prepared meat with the broach spike and secure it
from both sides with tightening forks.
•
Screw the handle on the front part of the broach, then insert
the pointed end in the opening at the rear oven panel,
protected with the revolving flap. Place the front part of the
spike on the support and lock it in position.
•
Insert the intercepting pan one guide below the broach.
•
Activate the roasting by selecting the mode "Grill".
•
The operation of the infrared heater is controlled by the
thermostat, and it is activated only if the oven door is closed.
•
Before closing the oven door and activating the heater,
remove the handle from the broach spike.
Grill table
Type of meat for grill
Weight
(in grams)
Guide level
(from bottom up)
Temp.
(°C)
Temp.
(°C)
Grill time
(in
min.)
Meat and sausages
2 beefsteaks, rare
400
5
230
-
14-16
2 beefsteaks, medium
400
5
230
-
16-20
2 beefsteaks, well done
400
5
230
-
20-23
2 pork scrag fillets
350
5
230
-
19-23
2 pork chops
400
5
230
-
20-23
2 veal staeks
700
5
230
-
19-22
4 lamb cutlets
700
5
230
-
15-18
4 grill sausages
400
5
230
-
9-14
2 slices of meat cheese
400
5
230
-
9-13
1 chicken, halved
1400
3
-
210-220
28-33 (1. side)
23-28 (2. side)
Fish
Salmon fillets
400
4
230
-
19-22
Fish in aluminium foil
500
4
-
220
10-13
Toast
4 slices of white bread
200
5
230
-
1,5-3
2 slices of wholemeal
200
5
230
-
2-3
Toast sandwich
600
5
230
-
4-7
Meat/poultry
Duck*
2000
1
-
150-170
80-100
Chicken*
1000
3
-
160-170
60-70
Pork roast
1500
3
-
140-160
90-120
Pork scrag
1500
3
-
140-160
100-180
Pork knuckle
1000
3
-
140-160
120-160
Roastbeef/beef fillet
1500
3
-
170-180
40-80
*may be broached
Cleaning and maintenance
Never clean the appliance with pressurized hot steam cleaner!
Before cleaning switch the cooker off and let it cool down
completely.
Front side of the casing
For cleaning of frontal part of the cooker use the usual cleaning
agents and follow the manufacturer's instructions.
Never use any aggressive cleaning agents or dish cleaning
accessories which might cause scratches.
Stainless steel front
(certain models only)
Clean the surface with mild detergent (soap) and soft sponge
which does not scratch. Never use aggressive cleaners or
solvents, otherwise you may damage the surface.
Enamel coated and plastic surfaces
(certain models only)
Clean the knobs and handles with soft cloth and liquid
cleaners, intended for use of smooth enamel surfaces.
Aluminum coated surfaces
Aluminum coated surfaces of the appliance (front) should be
cleaned with liquid non-abrasive agents and soft sponge. You
may also use cleansing agents intended for such surfaces, and
follow the manufacturer's instructions.
CAUTION:
Such surfaces may never come in contact with
oven cleaning sprays, because they visibly and permanently
damage aluminum surfaces.
Oven
The oven may be cleaned in a traditional mode (using oven
cleaners and sprays).
The following procedure is recommended for regular cleaning
of the oven (after each use):
Turn the mode selection button to the position
. Set the
temperature control button of the cold oven to 50°C. Pour 0,4 l
of water into the baking pan and insert it into the bottom grid
lead. After thirty minutes the food residues upon the enamel
coating are softened, and may be easily wiped off with a moist
cloth.
Otherwise respect the following cleaning tips:
