Gorenje Plus GIS64XC, Инструкция по эксплуатации

Страница: 14 / 36

454509
Switching on the hob and setting the power
The power has 9 settings. There is also a ‘boost’ setting, which is
indicated by a ‘P.’ in the display.
1. Put a pan on a cooking zone.
2 Touch the on/off sensor key .You will hear a short beep
and the display for each cooking zone will read zero (“0”). If
no sensor key is touched within ten seconds after switching
on the cooking hob, the cooking zone will be automatically
switched back off.
3. Slide your fi nger across the slider, from left to right, to select
the desired setting. The cooking zone will automatically start
operating with the set power (if a piece of cookware with
suffi ciently large diameter is perceived on the cooking zone).
Tip
In order to set the cooking power faster, simply press
on a point on the slider towards the right (or towards
the left, if you wish to decrease the power).
• Pan detection
- If the hob does not detect a (ferrous) pan after the cooking
power has been set, the pan detection symbol and the
selected power setting will fl ash alternately on the display
and the hob will remain cold. If a (ferrous) pan is not placed
on the cooking zone within 10 minute, the cooking zone will
automatically switch off.
• Residual warmth indicator
- A cooking zone that has been used intensively will retain
heat for several minutes after it has been switched off. An
'H.' appears in the display as long as the cooking zone is
hot.
Settings
14
Operation