GORAVE GOTV
AUDIO SENDER
Owner’s Operation Manual
V1.0 / 07-19-2016
MORE THAN MUSIC
5
2.4 TV Setup
1. SET YOUR TV AUDIO OUTPUT TO ‘EXTERNAL AUDIO’
The GoRave GoTV Audio Sender requires stereo PCM audio from your TV’s digital audio output. Every TV is different, so be sure
to change your television’s audio settings to output stereo digital PCM audio via the TV’s S/PDIF port.
2. CONNECT AUDIO SENDER TO TV
Connect your TV’s S/PDIF audio output (Coaxial or Optical Toslink pictured below) to the 3.5mm input on the GoTV Audio Sender.
3. CONNECT AUDIO SENDER TO POWER
GoTV needs power from an available USB port on your TV. If your TV doesn’t have an available USB port, use the included 5V
USB adapter. The adapter will operate between 90–270 AC line voltage with a line frequency of either 50 Hz or 60 Hz. There is no
need to convert or adjust the unit in any way. The LED indicator on GoTV will light indicating that it is powered.
NOTE: If you are going to be away from home for an extended period of time, it is a sensible precaution to unplug your audio and
video components, including the GoTV Audio Sender, while you are away. This will prevent damage from lightning or electrical
surges.
4. CONNECT AUDIO SENDER TO ONE OR MORE RECEIVERS
GoRave Audio Senders and Receivers (e.g. AR5 or Soul Way sound bar) need to be paired together to play. Start a show, video or
audio playlist on your TV to initiate audio playback.
The GoTV Audio Sender is now transmitting the TV’s audio signal. GoRave Receivers within the transmitter’s wireless range can
play that audio. To pair your GoTV and GoRave Receiver, double-click the Connect button on your GoRave Receiver. The LED
status indicator will turn bright amber when the wireless link is paired. You will hear your TV audio playing through the speakers
connected to the Receiver.
Save this pairing connection by pressing and holding the Receiver’s Connect button for 3 seconds. The Receiver’s LED indicator
Audio Cable from TV
LED Status Indicator
3.5mm Input Jack
GoTV Audio Sender
Infrared Receiver for Remote Control
USB Plug for Power
Connected to television’s Coaxial or Optical S/PDIF digital audio output
Coaxial
Optical Toslink
