If Remo isn’t responding as expected, press and hold both
buttons at the same time to reset it.
Note: If you reset Remo, you need to re-pair it with your camera.
RESETTING REMO
To see additional information regarding country certifications,
refer to the Important P Safety Instructions included
with Remo.
REGULATORY INFORMATION
8 sec
8 sec
When your camera is off, you can quickly capture video and
time lapse photos using the Shutter button on Remo.
STEP 1
HERO6 Black/HERO5 Black: With the camera off, press the
Mode button.
HERO5 Session: With the camera off, press the Menu button.
STEP 2
Say, “GoPro turn off” to power off your camera.
QUIKCAPTURE
STEP 3
During your activity, use Remo for QuikCapture:
•
For video, press the Shutter button on Remo.
•
For time lapse photos, press and hold the Shutter button
for 2 seconds.
Remo vibrates, beeps, and blinks when capture begins.
PRO TIP:
Once you power on your camera with the Mode
button, then power it off with the Remo command, just say
“GoPro turn on” to power it on again.
CAPTURING AUDIO WITH REMO
You can use Remo’s microphone to capture audio while
you record video.
STEP 1
Power on Remo.
STEP 2
Press the Power button on Remo again to turn on the
microphone. The microphone status light on Remo turns white.
STEP 3
Start recording video. Audio is captured only from the Remo
microphone (not the camera microphones).
STEP
4
To turn off the microphone, press the Power button on Remo.
PRO TIP:
For best results, clip Remo to your collar. Be sure
that your camera and Remo are not blocked by walls or other
obstacles. Submerging or splashing Remo with water can
distort the audio.
3 sec
REVB
