STEP 1
Turn on wireless on your camera. For details, see the user manual for your camera.
STEP 2
Power on both devices to connect them. The wireless status light on Remo blinks slowly (blue).
Note: You do not need to turn on your camera’s Voice Control feature to use Remo.
If the connection to the camera is lost, Remo emits a disconnection beep and the wireless status light blinks quickly. If the connection
is lost because Remo goes out of range of the camera, the connection is re-established when Remo comes back into range. For best
results, be sure that your camera and Remo are not blocked by walls or other obstacles.
CONNECTING REMO + YOUR CAMERA
CONTROLLING YOUR CAMERA
To control your camera with your voice, use the commands listed on the next page. Remo has a range of 33ft / 10m and is waterproof
to 16ft / 5m.
Note: Voice Control performance may be impacted by distance or significant wind and noisy conditions. Keep the product clean and clear of debris.
STEP 1
Power on Remo.
3 sec
STEP 2
While facing Remo, say a command from the list on the next
page. Remo vibrates, beeps, and blinks when the command
is understood.
PRO TIP:
With Remo, you can say any command at any time.
For example, if the camera is in Video mode and you want to
capture burst photos, just say “GoPro shoot burst.”
LIST OF COMMANDS
ACTION COMMANDS
DESCRIPTION
GoPro turn on
*
Powers on the camera (you
must first manually power on
the camera and then use the
voice command to power it off)
GoPro start recording
Captures video
GoPro HiLight
Adds a HiLight Tag to video
GoPro stop recording
Stops capturing video
GoPro take a photo
Captures a single photo
GoPro shoot burst
Captures burst photos
GoPro start time lapse
Captures Time Lapse photos
GoPro stop time lapse
Stops capturing time
lapse photos
GoPro turn off
Powers off the camera
MODE COMMANDS
DESCRIPTION
GoPro Video mode
Changes the camera mode to
Video (does
not
capture video)
GoPro Time Lapse mode
Changes the camera mode to
Time Lapse (does
not
capture
time lapse photos)
GoPro Photo mode
Changes the camera mode
to Photo mode (does
not
capture photos)
GoPro Burst mode
Changes the camera mode to
Burst mode (does
not
capture
burst photos)
PRO TIP:
When Remo and the camera are on, you can press
the Shutter button on Remo to begin capturing in the camera’s
current mode.
For the most updated list of commands, visit
gopro.com/help
.
*Available only on HERO6 Black and requires the Wake on Voice setting to be turned on
