THE BASICS
POWERING ON
Press and hold the Power button.
Note: Beeps and lights mimic those on the camera.
POWERING OFF
Press and hold the Power button.
POWERING ON + OFF
When the battery status light turns red, charge Remo as shown
below. The light turns green when charging is complete.
Fully charged in 80 min
CHARGING
3 sec
5 sec
1. Battery Status Light
2. Power Button
3. Shutter Button
4. Microphone Status Light
5. Wireless Status Light (blue) / Remo Status Light (red)
1
4
5
3
2
P SELECTING A LANGUAGE
Step 1
Press the Mode button to get to Connection Settings, then
select Connect New Device > Remo.
Step 2
With Remo powered off, press and hold the Power button until
the blue light blinks.
Remo vibrates once when pairing is complete.
8 sec
Step 3
If the language option appears on the camera, select the
language that you want to use. Otherwise, Remo uses the
language that you previously selected when using Voice Control
on your camera.
Note: To change the Voice Control language, connect your camera to
the Capture app. For details, see the HERO5 Session User Manual.
PAIRING
Step 1
On the camera, swipe down and then tap Connections >
Connect New Device > Remo. (On HERO5 Black, tap Connect >
Connect New Device > Remo.)
Step 2
If needed, select a Voice Control language on the camera.
Step 3
With Remo powered off, press and hold the Power button until
the blue light blinks (about 8 seconds).
Remo vibrates once and the camera displays a confirmation
when pairing is complete.
8 sec
SELECTING A LANGUAGE
Remo uses the language that you previously selected when
using Voice Control on your camera. If you did not yet select a
Voice Control language on your camera, complete these steps.
Step 1
Swipe down and then tap Preferences > Language (in the Voice
Control section).
Step 2
Tap a language.
SETTING UP HERO6 BLACK /
HERO5 BLACK + REMO
SETTING UP HERO5 S REMO
