GoPro HERO10 Black, Руководство пользователя

Страница: 8 / 41

14 15
How to Control Your GoPro
BETaFlIGHT
You can use BetaFlight to set up shutter control for your camera.
Connect your flight controller to the BetaFlight configurator.
From the command line interface (CLI) execute these commands:
resource <free_pad_name> <optional number> NONE
resource PINIO 1 <your_pad_id>
set pinio_config = 129,1,1,1
set pinio_box = 40,255,255,255
save
Replace "free_pad_name" and "your_pad_id" with an available resource
on your flight controller. If PINIO 1 is not available, you will need to adjust
the command for your drone. Be sure to save your flight controller
configuration before making any changes.
CaPTURE MODEs
Your camera has four capture modes.
Video
Includes Standard, Activity, and Cinematic presets.
To learn more, see Recording Video (page 17) .
Photo
Includes Photo, LiveBurst, Burst, and Night presets.
To learn more, see Taking Photos (page 21) .
Time lapse
Includes TimeWarp, Time Lapse, and Night Lapse presets.
To learn more, see Capturing Time Lapse (page 24) .
live streaming
Set up and start a live stream using the GoPro Quik app.
To learn more, see Live Streaming (page 28) .
How to Control Your GoPro
PRO TIP: You can choose which preset will be loaded and ready to
go when you turn on your GoPro. This can be done with a QR code
or the GoPro Quik app.
1. From the app screen, tap .
2. Tap Default Preset to choose a preset.
GETTING THE sHOT
1. Simply press the Shutter button to start recording.
2. Press the Shutter button again to stop recording (Video,
Time Lapse, and Live Streaming only).