GoPro Hero 3 Silver edition, Руководство пользователя

Страница: 32 / 36

62 63
To Secure Camera in Housing:
1. Open housing and drop camera into position.
2. Make sure the seal around the backdoor is free of debris.
3. Close the housing backdoor and squeeze it closed to ensure a
good seal.
4. Pivot the hinged arm backwards and hook the lip of the latch into
the grooved top of the housing backdoor.
5. Push the latch down to snap it into place.
Slim housing surfboard mount installation
Slim housing remove camera Slim housing insert camera
Slim housing closed Swapping housing doors
Quick Release Thumb Screw + Slim housing = Complete Unit
WARNING: Always secure the camera in its housing when using
the camera in or around water. Do not get the camera or the
battery wet.
/ Camera Housing / Camera Housing
Your HERO3+ Silver camera comes with two types of backdoors:
Standard Backdoor (waterproof) and Skeleton Backdoor (non-waterproof).
The Standard Backdoor makes the housing
waterproof to 131’ (40m). Use this door when you
need to protect the camera from water, dirt, sand
and other environmental hazards.
The Skeleton Backdoor (non-waterproof)
provides better sound quality by allowing more
sound to reach the camera’s microphone. It also
reduces wind noise at speeds up to 100mph when
mounted on helmets, motorcycles, bikes and
other fast-moving vehicles. Use this backdoor
only when sand, excessive dirt/dust and water
damage is not a risk. This backdoor is also
recommended for use inside vehicles.
PRO TIP:
Apply Rain-X ®
or a similar anti-beading solution to the
camera housing lens to prevent water spots from forming when using
your camera in rain or water.