Goot NC-100R, Руководство пользователя

Страница: 16 / 16

16
6 Maintenance
7 Replacement Parts
Caution
Do not dismantle this product.
Even when the correct air pressure has been input, if
Nitrogen is not being output, it could be due to moisture,
oil or dust clogging the unit up. If this occurs, please
have the unit serviced.
1. At least once a month, please check the Air Dryer, Air Filter/Mist
Separator, Micro Mist Separator and Regulator are working properly.
2. Please also check the tubing once a month to ensure there is no damage
and that air and/or gas is not leaking from the tube.
No. Part Name Part Code
① Replacement NC Polyurethane tube φ 6×2m B1072YG00
Please contact your nearest distributor.
NOTE : The Nitrogen Gas Separation Membrane inside this device is not
available as a replacement part. Please return the unit to your distributor to
have this repaired. At the following level of usage, the Nitrogen Separation
Membrane should be replaced after two years: Appropriate installation, as
shown in section 5.1, in use for 8 hours per day with a flow rate of 1.0L/min.
TAIYO ELECTRIC IND.CO.,LTD.
www.goot.co.jp E-mail:info@goot.co.jp
2-16-8 Yamate Fukuyama Hiroshima 720-0092, JAPAN
TEL:(81)84-951-1512 FAX:(81)84-951-9531
Customer service : Contact your nearest distributor
TAIYO ELECTRIC IND.CO.,LTD.
太洋電機産業株式会社
is a registered trade mark of TAIYO ELECTRIC IND. CO., LTD.
Printed in Japan, MARCH 2020 A1070NJ00
お客様相談窓口 Home Page:
www.goot.co.jp info@goot.co.jp
E-mail:
東京 03 (3832) 1774 大阪 06 (6644) 3508
新潟 0256 (47) 1715 広島 084 (951) 9010