www.procontechnology.com.au
Phone: (03) 98306288
TAIYO ELECTRIC IND.CO.LTD.
3 RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
WARNING
Do not attempt to operate this soldering station until you have
read thoroughly and understand completely all instructions,
safety rules, etc. contained in this manual. Failure to comply
may result in accidents involving fire or serious personal injury.
1. BEFORE OPERATING, PLEASE FULLY UNDERSTAND THE SOLDERING STATION.
Please read the owner's operation manual carefully and completely. Learn its applica-
tions and limitations as well as specific potential hazards related to this soldering station.
2. DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do not use the soldering station in damp, humid or wet locations. Never expose it to rain
including outside.
Never use it in an explosive atmosphere. The heat from the heater could ignite fumes.
Be sure that the work area is properly lit.
3. KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDERING STATION.
Do not let bystanders touch the soldering station. All bystanders, especially children,
should be kept a safe distance from the work area.
4. PROPERLY STORE THE SOLDERING STATION WHEN NOT IN USE.
When not in use, the soldering station should be stored in a dry location, out of the
reach of children.
5. USE IT FOR THE RIGHT JOB.
This soldering station is an electrical tool used to solder parts and melt solder. Do not
use the soldering station for any purpose not intended for example the
soldering station should never be used to warm water or other liquids.
6. WEAR PROPER APPAREL AND SAFETY GLASSES.
Do not wear loose clothing such as a necktie. Tie up long hair. Clothing or hair can burn
by contacting the tip or surrounding heated parts.
7. CONNECT TO THE SPECIFIED POWER SUPPLY.
The power voltage for this soldering station is indicated at back of the control unit.
Never plug the soldering station into any other voltage.
