Summing
Press the SUM button to switch between stereo and dual mono.
Output features DMS™ which stands for Dual Mode Summing.
Unique circuitry, designed by Goodwood Audio, that provides two
types of summing, Stereo Sum and Split Sum. The default setting
is Stereo Sum.
Stereo Sum
Use this mode when the last pedal in your signal chain is stereo.
When the SUM button is out a true stereo signal is being sent to
your amps. When the SUM button is in, the left and right signal
being sent by your last pedal is combined to mono, and then split
to both outputs – commonly referred to as dual mono. This is
useful if you only have one amp at rehearsal or at home, but two
amps live. When you only have one amp, press the SUM button in to
preserve your stereo ping pong delays, and then press it again for
when you have two amps. When you’re playing live with two amps
and one dies, press the button in and the repeats of your ping pong
delay will be combined to both outputs so it doesn’t matter which
amp fails.
Split Sum
This mode is best suited to people who run a mono pedal board,
but like using two amps. To change to this mode take the lid off the
box and move the two dip switches from Stereo Sum to Split Sum.
Connect your last pedal to the L in of Output and leave the push
button out. This will create a dual mono signal. If you push the
button in the L output will stay active, but the R output will have
no signal.
Содержание Output TX
Страница 1: ...OUTPUT MANUAL...
