GVC-1502-VAC 0920
5
• In the event of breakdown or malfunction, switch off the GVC-1502-VAC and
contact Goodway Technologies Corp. Customer Service Department.
• Electrical appliances and fittings (TV, radio, lights, etc,) should never be
cleaned with steam, even when not connected to a power supply. Exercise
extreme caution when cleaning fixed electrical plant equipment; if in any doubt
contact the relevant suppliers.
• Do not put any detergent or other chemical substances (especially perfumed)
in the water canister, as noxious gases can arise due to the high temperature.
• Both main ‘on/off’ and pistol-grip switch
must be off
(‘OFF’) when connecting
steam hose to the GVC-1502-VAC.
• Ensure that the accessories are securely connected into the pistol-grip, by
pulling both parts against each other to ensure a tight fit.
• Exercise care when accessing internal components. For instance, steam-
associated components (e.g. drain screw) get
very hot
during operation and
cools down very slowly after use
.
• Do not use on or near
heat sensitive materials
; this may
damage
such materials!!
• If you are unsure whether the material you want to clean is suitable for dry
vapor steam cleaning, check first with a trial application on a small unobtrusive
piece of the same material.
• Do not use the small round metal brush on scratch-sensitive materials.
• Exercise utmost care when cleaning windows or glass surfaces in low
temperatures; warm the surfaces with steam beforehand to reduce the
possibility of damage and injury.
•
The
GVC-1502-VAC
must never be immersed in water. Failure to comply with
this warning will ENDANGER LIFE.
• Always store the GVC-1502-VAC in a safe, dry and
frost-free
place. Frozen
components can fail. Exercise care when storing directly after use as residual
heat remains for some time.
• For the GVC-1502-VAC to work efficiently the ambient temperature should be
between 50°F (10°C) and 104°F (40°C) with humidity lower than 90%.
NOTE:
Deionized and distilled water should never be used in the GVC-1502-VAC.
POWER CONNECTIONS
The GVC-1502-VAC is supplied with 13 feet (4 m) of cable and has a 15A three
pin plug.
Ensure voltage between machine and supply match.
