background image

BIOSPRAY®-10C     1020

8

OTHER OPERATING INFORMATION:

Please be advised, as part of the self-compensating regulator technology, you will  

hear a slight CO

2

 release or “hissing” sound from the center of the knob on the self-

compensating regulator from time to time. This is normal, and is a result of the  

regulator compensating for pressure changes in the CO

2

 cylinder. This compensation, 

or “hissing”, is very gradual and may only be audible for a short period of time and is the 

regulator maintaining pressure. The "hissing" is caused by the venting through a small 

hole in the center of this regulator.

WHEN A “HISSING” SOUND WILL OCCUR:

1.   After filling cylinder and connecting to the system in a hot environment. (The 

temperature will rise in the cylinder, resulting in compensation).

2.   After transporting unit/cylinder. (The temperature will decrease in the cylinder, 

resulting in compensation).

3.   When  CO

2

 cylinder is low and almost empty. (The CO

2

 is so low that pressure 

is changing constantly to accommodate the CO

2

 release by the compensating 

regulator).

4.   Unit sits idle for a period of time. (Environmental conditions may change, resulting in 

a temperature change in the cylinder).

PERSISTENT “HISSING” IS NOT NORMAL:

When the CO

2

 valve is open, if there is a persistent, non-stop “hissing” sound, whether 

spray gun trigger is pulled or not, check the CO

2

 coil hose to the spray gun for damage  

or leaks.

STORAGE AND MAINTENANCE

As a preventative maintenance measure, it is requested that the hoses be checked for 

wear and all sealing areas are checked for leaks after each use.
Also lubricate all hinges with a food grade mineral oil at least once per year.

TIP:

 

Depending on your usage, volume and needs, it is recommended to have an extra  

set of CO

2

 tanks on hand, so that you can continue using your BioSpray® System 

while your empty CO

2

 cylinders are being refilled.

WARNING:

 

Use only 10 lb. (BioSpray®-10C) preferably aluminum tank with a 7” diameter. If a 

spare tank is needed, please call Goodway Technologies at (800) 333-7467 toll-free 

or email us at [email protected]. Do not use any CO

2

 tank with a dip tube.

Содержание BioSpray-10C













Отзывы: