Goodway 93-ACC-BRUSHLESS, Инструкция по эксплуатации и техническому обслуживанию, Страница: 2 / 21

2
93-ACC-BRUSHLESS 11/14/2016
Table of Contents
INTRODUCTION ....................................................................................................................... 2
GENERAL .................................................................................................................................. 2
IMPORTANT SAFETY INSTRUCTION ....................................................................................... 3
GENERAL FEATURES .............................................................................................................. 4
SET-UP...................................................................................................................................... 8
OPERATION .............................................................................................................................12
MAINTENANCE ........................................................................................................................14
TROUBLESHOOTING ..............................................................................................................20
INTRODUCTION
Thank you for purchasing this Goodway conveyor cleaner. We appreciate your
business and look forward to serving you in the future. As with all Goodway
products, you can be assured that the finest quality components and workmanship
have gone into this machine.
Please take a few minutes to read the following Operating and Maintenance
Instructions. By carefully following the instructions, you will obtain years of trouble
free service from this product. Please pay particular attention to the safety
instructions and exercise caution when using this machine.
We are here to serve you!
For Sales call 1-800-333-7467
For Service call 1-800-370-2855
Goodway Technologies Corp
.
GENERAL
The 93-ACC-BRUSHLESS system is a product designed to clean flat continuous
belts. The system makes use of steam and vacuum to remove debris from the food
contact surfaces of the belt. The system envelopes the total belt, which means that the
edges of the belt are also cleaned, a previously neglected part of belt cleaning and an
area that can otherwise present hygiene problems.
Vacuum is applied through a full width squeegee assembly to the food contact
side of the belt. This vacuum lifts the emulsified debris off the belt, drying the belt in the
process. Vacuum is applied using an industrial vacuum unit that captures the debris in a
tank. The vacuum unit is a separate device, and various models of varying power and
volume are available should this be required.
The unit is supplied as an assembly for fixing it to a conveyor structure. The
fixing points located on ‘C’ frames are designed to attach to a conveyor structure that
picks up on the geometry of the cleaning head, supplied in advance. The unit
incorporates two rollers, one on either side of the cleaning assembly, to guide the belt
through the cleaning head.