goodnature EG-400, Руководство пользователя

Страница: 7 / 12

07
12
EG-400
OWNER’S MANUAL
Section 4: Operation
Check to make sure power is disconnected and machine is off before setup.
SAFETY GLASSES must be worn at all times during operation.
Inspect for physical damage, electrical damage, or any loose or bare wires.
If any items are damaged due to shipping, contact the freight carrier within 15 days of receiving your shipment.
If any parts are missing or damaged please contact our customer service department by calling (716)-855-3325.
The EG-400 comes with two sizes of grinding screens. One is already installed on your machine.
For harder fruits and vegetables a small holed grinding screen is recommended. A larger holed screen is
recommended for a softer produce.
CAUTION: DO NOT ATTEMPT TO ACCESS GRINDING SCREEN WITHOUT FIRST DISCONNECTING THE
POWER SOURCE.
Drop
Drop
Drop
Drop
Drop
Drop
Drop
Drop
4.1 SETUP
1
2
3
4
Release front latch and lift hopper back
The grinder blade should spin from the top of the unit towards the back. The grinding screen rests in a track located below
the blades. Beginning at the rear of the track, slide screen into the track until it reaches the front.
Lower the hopper to its original position and latch securely.
To change the screen, simply slide the old screen out and slide the new on in.