Goodmans XB5CDG, Руководство пользователя

Страница: 9 / 12

8
PLAYING CD OR CD+G DISCS
1. Push the CD door to open the disc compartment, and load a CD.
2. Close the door, the unit will search the track and the display will show the total number
of tracks.
3. Press the
R
/
P
button, disc play will begin from the start of the firs t track.
4. Press the
Pb
or
fP
button to select the track of your choice.
A particular track can be selected by pressing
Pb
or
fP
buttons. If this is done before
pressing the
Pb
or
fP
button, disc play will start with the selected track when the
Pb
or
fP
button is pressed.
Notes:
1. If the disc is deeply scratched, or too dirty, disc may not play.
2. Please note that the SEARCH facility is disabled whilst playing CDG’ discs. This is
to prevent corrupted on screen graphics showing on the TV screen.
CONNECTING THE CD+G SYSTEM
The CD+G (CD music + Graphics) player will allow standard audio CD and CDG disc to
be played through the system. When special Karaoke CDG discs are used, such as the
one provided, words of the song will appear on your TV screen.
CONNECTING TO THE TV
Connect scart lead to TV and XB5 and select AV on your TV.
Connect one end of the supplied scart cable to your TV and the other end to the scart
socket on the rear of the XB5. Make sure you select AV channel on your TV.
Note: When a CD Graphic disc is loaded, the words of the song will appear on TV screen
when it is being played.
IMPORTANT INFORMATION
This compact disc player has built-in error compensation circuits to correct for minor de-
fects in a disc. There are limits, however, to the amount of correction available. In some
cases, the CD player may skip some tracks on a disc during disc play. This problem may
be caused by defects (such as scratches) in the disc being, played, which are too large
for the error compensation circuits to handle, If you encounter this problem, check the CD
player operation as follows before having the unit serviced,
Play a new disc. If the CD player operates normally, the skipping problem is probably due
to a defective disc.
TO STOP A CD PART WAY THROUGH
1. Press the
C
button, disc play will stop, the Play indicator will go off and the display will
show the total number of tracks.
2. To temporarily stop display (pause mode), press the
R
/
P
button, disc play will pause
at the current play position.
3. To resume disc play, press the
R
/
P
button again. The player indicator will be displayed.
IB for 6300027.indd 7 5/17/2006 2:50:37 PM