2
MAINTENANCE AND CARE
SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet European safety standards
but like any electrical equipment, care must be taken if you are to obtain the best results
and safety is to be assured.
DO
read the operating instructions before you attempt to use the equipment.
DO
ensure that all electrical connections (including the mains plug, extension leads
and interconnections between pieces of equipment) are properly made in accord
ance with the manufacturer’s instructions. Switch off and withdraw the mains plug
when making or changing connections.
DO
consult your dealer if you are ever in doubt of the installation, operation, or safety
of your equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if
it is damaged in any way -switch off, withdraw the mains plug and consult your dealer.
DON’T
remove any fixe
d cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is
specificall
y stated that
it is designed for unattended operation or has a standby mode. Switch off using the
switch on the equipment and make sure that your family knows how to do this.
Special arrangements may need to be made for infir
m or handicapped people.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to rain or moisture.
Above all -
- Never let anyone, especially children, push anything into holes, slots or any other opening
in the case-this could result in a fatal electric shock.
- Never guess or take chances with electrical equipment of any kind.
- It is better to be safe then sorry!
CLEANING THE UNIT
WARNING
AS WITH ALL MAINS POWERED UNITS, ALWAYS DISCONNECT THE MAINS PLUG FROM
ITS SOCKET, BEFORE ATTEMPING TO CLEAN THE UNIT, ONLY USE A SOFT CLOTH
MOISTENED WITH WARM SOAPY WATER, DO NOT USE HARSH ABRASIVES OR CHEMI-
CALS TO CLEAN WITH AS THIS WILL DAMAGE THE UNIT GRAPHICS OR FINISHING.
IB for 6300027.indd 2
5/17/2006 2:50:36 PM
Содержание XB5CDG
Страница 4: ...3 LOCATION OF CONTROLS ...