When using with a PC:
4. Plug the analogue video signal cable into the Analogue
Video Input port on the back of the
display (“VGA IN“ as shown above).
5. Connect the other end of the video cable into
the
computer’s video port.
(Please check
the
computer’s documentation if you’re not sure where the port is located.)
Note:
For best display performance, it is strongly recommended that Auto Setup be used to
automatically configure
the
display’s settings (only for Analogue input).
Connecting a set top box / DVD players:
6. Locate the scart to composite video/audio cable.
7. Insert the scart plug into the scart socket of the set top box / DVD player.
8. Connect the RCA plug (Yellow) to the composite video in socket on the rear of the panel.
9. Connect the RCA plugs (Red, White) for the audio to the sockets on the rear of the panel.
7