42
Record key does not start recording
·
Make sure there is a recordable (DVD+RW, DVD+R, DVD-R or DVD-RW) disc inside the recorder.
·
If you wish to record from RF input, check the program table to see the available channels. You
may need to do an APS (Automatic program search) again to record, if the automatic search after
installation has failed to find channels.
·
If you wish to record from the SCART, CVBS, S-Video input source, make sure that the record
source is active and sending signals.
·
To record from a DVD player the DVD should not be copy protected.
·
If there is no space left on the disc you will see the error message “disc is full.” Erase some titles
to create space for new recordings.
Switch to a source, but there is no signal
·
Make sure the antenna is connected to RF input and there is TV broadcast on some channels.
·
If you are using scart, CVBS, S-Video or Video inputs, make sure the record source is properly
connected and switched on.
Timer recording does not work
·
Make sure that the system time and record start time are set correctly.
Time will be displayed when the recorder switches to standby in power saving off mode.
·
Make sure that the program number of the scheduled record is on the program list.
You will not be able to record, if the program number found during APS does not contain an active
channel.
Edit disc option is disabled
·
Make sure that the recorder is in “full stop mode”.
Your country doesn't exist in "Country Selection" list in setup menu.
·
Select "Other" option.
Audio is not proper in tuner mode.
·
Make sure right country is selected before APS or manual search.
·
Make sure right audio standard is set for related program in Modify Channel menu.
·
Change Standard option manually if needed.
If nothing works
·
If you have tried the above solutions and nothing seems to work, try switching your DVD off and
on again. If this does not work, contact your supplier or your initiating service.
Never attempt to
repair a defective DVD recorder yourself.
