9
SAFETY PRECAUTIONS
Power Source
The unit should be operated only from a 220-240V~ 50 Hz outlet. Please do not open the cover.
There is high voltage in the set, which will endanger your life. Please contact local service agent for
help and advice. Repairs to be carried out by a qualified technician only.
•
If you are not going to use the apparatus for a long time, be sure to disconnect the recorder from
the wall outlet.
Power Cord
Do not place the unit, a piece of furniture, etc., on the power cord (mains lead), or pinch the cord.
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the
power cord when your hands are wet as this could cause a short circuit or electric shock. Never
make a knot in the cord or tie it with other cords. The power cords should be routed in such a way
that they are not likely to be stepped on. A damaged power cord can cause fire or give you an
electrical shock. Check the power cord once in a while. When you find it damaged, ask closest
service agent for help. When the AC power cord need to be changed, it should be done at a qualified
service shop only.
Choice of Location
•
Please do not place the set in a place subject to direct sun light, excessive dust or mechanical
shock or in a location near heat sources.
•
The set should be placed on a solid and safe base. Do not place the apparatus on a soft surface
such as a rug that might block the ventilation holes on the bottom.
•
A location should not be selected such as a room with high humidity, as the condensation, arising in
the kitchen for example, may cause malfunction or damage the set.
•
Heating or other thermal radiation under the set also may cause malfunction or damage the set.
•
The hot air, which arises during the operation, should be ventilated with sufficient air circulation.
Please do not put the set into closed areas and do not cover it.
•
Please avoid the contact of the set with water or humidity. Do not put into operation near bath,
swimming pools.
•
Take care to provide a good air circulation. Place the apparatus in a location with adequate
ventilation to prevent heat build-up in the apparatus.
•
Should any solid object or liquid fall into the cabinet, unplug the apparatus and have it checked by
qualified personnel before operating it any further.
