-11-
BASIC CONNECTION
E Connecting to a decoder with Dolby digital (AC-3) processing or MPEG processing
When DV Ds recorded in Dolby digital or MPEG audio are play ed, Dolby digital bit stream or MPEG audio bit stream is output f rom the
player’
s COAXIAL digital audio output connector. When the player is connected to a Dolby digital decoder or MPEG audio decoder, you
can enjoy theater-quality at your home.
Disc
Sound record format
Optical/Coaxial output
DVD
Dolby Digital
(AC-3)
Dolby Digital bit stream
(2-5.1ch) or PCM (2 ch)
(48KHz/16bit)*1
Linear PCM
Linear PCM (2ch)*1
MPEG1/MPEG2
MPEG audio bit stream or PCM
(2ch)(16 bit)*1
CD
Linear PCM
PCM (44.1KHz sampling)
DTS
RAW.DIGITAL THEATRE SOUND
5.1ch(Digital out only)
*1 Sound having 96KHz sampling is converted to 48 kHZ sam-
pling w hen it is output from the unit’
s coaxial digital audio output
connector
Note: Refer to “SETUP” on how to set up.
For your reference:
Dolby Digital( AC-3) is a digital sound compres sion technique
dev eloped by the Dolby Laboratories Licensing Corporation.
Supporting 5.1-channel
Linear PCM is a signal-recording format used in CDs. While CDs
are recorded in 44.1KHz/16bit,DVDs are 48KHz /16 bit up to
96KHz/24 bit.
Caution for the coaxial digital audio output connector
Do not connect an amplifier (w ith coaxial digital input connector)
w hich does not contain the Dolby Digital(AC-3) or MPEG audio
decoder otherw ise it may be harmful to your ears and destroy
your speakers
NOTE:
1. Set digital output to SPDIF RAW w hen play disc w ith 5.
1CH form at.
2. Input frequency of the am plifier should m atch the unit
LPCM setting. Set LPCM to 18K if input frequency does
not support 94K, 24bit.
TV set
AV cord
Coaxial connector
Coaxial cord
All are optional
Equipment with
Ac3 / MPEG
decoder