5
Thank you for purchasing the clock radio for your iPod. Designed specifically to work with your
docking iPod, this system provides high quality audio and radio performance that brings out the
best in your music.
Please read this instruction book carefully before operating the clock radio
, and keep it for future
reference.
To place an insert:
iPod Inserts
Your clock radio
comes with removable inserts to ensure your iPod fits properly in the dock on the
top of the system.
Due to new iPod models, new inserts subject to availability.
Select the insert for your iPod. Using the correct insert ensures the proper fit for your iPod.
Gently press the iPod insert into the dock.
Carefully place your iPod into the dock. (The iPod must not be in a case or “skin”).
To remove/replace an insert, first remove your iPod, then grip the insert and pull gently upwards.
Install MW loop antenna
Plug the MW loop antenna into the connector located on the back of the unit for MW band radio
operation. For best reception, please move the MW antenna 12" away from the unit and iPod.
Install AC Adaptor
Connect the of AC adaptor cable plug into the jack on the back of the system, then plug the AC
adaptor into the wall outlet.
1.
2.
3.
4.
Getting Started
Shuffle
Mini Insert
Thin iPods Insert
Thick iPods Insert
Nano Insert
Use with
iPod Shuffle
Use with iPod
Mini
iPod 3 Gen 10-15 GB
iPod 3 Gen 20 GB
iPod 4 Gen 20 GB
iPod Photo 30 GB
iPod 3 Gen 30 GB
iPod 3 Gen 40 GB
iPod 4 Gen 40 GB
iPod Photo 40 GB
iPod Photo 60 GB
iPod Nano 2 GB
iPod Nano 4 GB
6
Install/Replace Backup Battery
The clock radio
uses a backup battery system to provide continuous alarm operation and clock
settings in the event of a power failure. If the Backup Battery has been installed and a power failure
occurs or the AC cord is accidentally disconnected, the display will not remain lit, but the current time
and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm
settings.
Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery
replacement.
Open the battery compartment cover located on the bottom of the unit.
Insert 2 “AA” batteries, checking that the polarity (+ and - ends of the batteries) matches the
drawing inside the battery compartment. We recommend the use of alkaline batteries for longer
life. Different types of batteries or new and used batteries are not to be mixed.
Close the compartment cover.
Batteries information:
1.
2.
3.
4.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Maintenance
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or
other protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and and water. Stronger cleaning
agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
Getting Started
