Goodmans Product Information Helpline (0870) 873 0080
P. 17
LOADING/EJECTING A DISC
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
Battery: Two AAA size battery.
Using the Remote Control
Point the remote control towards the
player front face remote sensor
RX
(remote control signal receiver).
Operation angle: About
±
30 degree in
each the direction of the front of the
remote sensor.
REMOTE CONTROL
Loading a Disc
When all connections have been
completed, load a disc as follows:
1. Turn the ignition on to the accessory
position.
2. Press the
PWR
button (1) on the front
panel or
POWER
button on the remote
control to turn on the unit.
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
Ejecting a Disc
Press button (3) on the front panel or
(EJECT) button on the remote control
to eject the disc.
1
2
3