Getting started
Putting in the batteries
Open the battery cover of the remote control and put
two AAA size batteries so that the ‘+’ and ‘-’ marks
on the batteries match the ‘+’ and ‘-’ marks inside the
remote control. Replace the battery cover.
1
2
3
Plug in and switch on
Insert the power lead into the ‘DC 12V 2.5A’ socket
on the back of the Digital TV Recorder.
Insert the plug into a mains socket. The standby
light on the front of the Digital TV Recorder will
come on.
Switch your TV On and select HDMI.
Press the
[STANDBY]
button on your remote control.
The first time install screen
The first time installation screen will appear on
screen.
If the signal strength is above 50% press the
[OK]
button on your remote control to continue
the setup.
Follow the instructions on screen to complete
the installation.
Step 1 of 6
Step 2 of 6
Step 3 of 6
Step 4 of 6
R
Step 5 of 6
OK
Continue
WARNING
!
Make sure that your receiver has been connected correctly
before continuing the installation
If signal strength is less than 50%
please check the dish alignment and connections
Signal Strength
100%
50%
25%
75%
Step 6 of 6
First Time Installation
04
7
Goodmans GS104TRH User Guide v5.indd 7
Goodmans GS104TRH User Guide v5.indd 7
01/11/2013 09:42:11
01/11/2013 09:42:11
