Goodmans 347531, Руководство пользователя

Страница: 16 / 24

16
4.20 Setting the alarms
You can set two completely separate alarm times (ALARM 1 and ALARM 2) and
activate either or both of them to wake you with a buzzer or the radio. You can
also pre-set the station and volume settings that the alarms will wake you with.
Note : You must complete all settings before leaving the menu or your changes
will not be saved.
1. With the radio switched on (Alarm settings cannot be set in Standby mode).
Press the ALARM button.
2. Alarm 1 Setup is displayed. To set Alarm 2 press the ALARM button again.
Press the TUNE/SELECT rotary control to Select.
3. Alarm 1 Wizard On time is displayed and the hour digits for the alarm will
flash. Use the TUNE/SELECT rotary to scroll to the hour for the alarm and
press the TUNE/SELECT rotary to Select.
4.
The minutes for the alarm will now flash. Use the TUNE/SELECT rotary to
scroll to the minutes for the alarm and press the TUNE/SELECT rotary to
Select.
5. The duration for the alarm will now flash. Use the TUNE/SELECT rotary to
scroll for the duration for the alarm and press the TUNE/SELECT rotary
to Select. You can choose from 15, 30, 45, 60, 90 and 120 minutes. The
source for the alarm will now flash.
6. Use the TUNE/SELECT rotary to scroll to the sound source for the alarm.
You can choose from Buzzer, DAB or FM radio. Press the TUNE/SELECT
rotary to Select.
Note : If you select DAB or FM radio for the alarm source ‘Last listened’ will
flash in the display. Press the TUNE/SELECT rotary and the last listened to radio
station in DAB or FM, as appropriate, will be used for your alarm.
7. Daily will flash in the display. Use the TUNE/SELECT rotary to scroll to the
frequency for your alarm. You can choose from Daily, Once, Weekends or
Weekends. Press the TUNE/SELECT rotary to Select.
Note : If you select ‘Once’ you will be prompted to set the date for your alarm.
8. Alarm 1 Wizard will be displayed and a row of rectangles. Please use the
TUNE/SELECT rotary to indicate the volume level for your alarm. You will
not be able to set this for less than 4 rectangles.
9. Alarm 1 Wizard Alarm Off is displayed and ‘Off’ will be flashing. Use the
TUNE/SELECT rotary to display Alarm On or Off and press the TUNE/
SELECT rotary to select. Alarm Saved is displayed.