Goodmans 347531, Руководство пользователя

Страница: 12 / 24

12
4.10 DRC (Dynamic Range Control)
This causes the radio to change the dynamic range of the audio signal.
Changing the dynamic range can change the ‘loudness’ and/or ‘quality of
sound’ of the programme that you are listening to so that it will be more suited
to your listening environment.
1. Press and hold the MENU button in DAB mode to enter the menu options.
Use the TUNE/SELECT rotary to display <DRC> Press the TUNE/SELECT
rotary to Select.
2.
Use the TUNE/SELECT rotary to choose between DRC off, DRC Low and
DRC High.
3. Press the TUNE/SELECT rotary to Select and save the setting.
4.11 FM Radio
Press the MODE button until you are in FM mode, check the display, which will
confirm the mode.
4.12 Tuning to a Station (FM)
Please make sure that the aerial is fully extended before you attempt to tune
to an FM station. This will ensure that the maximum signal strength is available
when the radio begins to scan. Extending the aerial also ensures the best
possible sound quality.
1. You can use the TUNE/SELECT rotary to scroll up or down the FM
frequency band.
2. Alternatively you can press the SCAN button to scan up the frequency band
or press and hold the SCAN button to scan down the frequency band.
Once a station has been found, the scan will stop automatically.
3. Use the TUNE/SELECT rotary to fine tune each station in 0.05 MHz
increments.
4.13 Scan Setting (FM)
When performing a scan you can set the sensitivity level of the stations to be
found. E.g.: strong signals only or all stations.
1. In FM mode, press and hold the MENU button, <Scan setting> will be
displayed. Press the TUNE/SELECT rotary to select.