Good Way HPW-2600G, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 12

WINTERIZING YOUR PRESSURE WASHER
(This is also good practice if the cleaner is to remain unused for more than 3-4 weeks.)
•
•
•
•
•
•
•
Shut off the water supply and disconnect hose.
You need a short (2”) length of hose with a male garden hose fitting on one end.
Connect the short hose to the inlet of the machine.
Put the other end of the hose into a container of windshield washer or antifreeze.
Turn on Cleaner and open gun until liquid comes out of nozzle “foamy” or “soapy”.
Put gun in OFF position for 5 seconds to get antifreeze into bypass line.
Shut off motor – unit is now winterized.
TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE REMEDY
Low Pressure Loose belt on pump Tighten belt
Leaks in water system Tighten all fittings
Insufficient water supply Fill tank or increase line
size to machine
Outlet orifice worn or wrong
size Replace with correct orifice.
CAUTION: Do not use
smaller than recommended.
Excessive pressure will
damage pump.
Gun control unloader valve
bypass leak Repair or replace unloader
valve
Dirty or worn check valves
in pump Replace or clean. Refer to
high pressure pump manual
Cylinder cups leaking
and/or work cylinder
sleeves Replace. Refer to high
pressure pump manual
7