background image

Mini Docking Station User’s Manual 

Video and DVD Playback in Extened Mode 

On Windows Vista with extended mode, it’s suggested that you run video or DVD 
playback programs on your primary monitor instead of the add-on monitor to 
ensure the playback performance.   

Mirror Your Windows Desktop 

This mode is referred to as “mirror” or “clone” mode. In this mode, your original 
screen (the primary display) will be mirrored to the add-on monitor. 

 

In mirror mode, the video component will automatically select the settings (screen 
resolution, color quality and refresh rate) for the add-on monitor. But you can 
manually adjust the settings as required. However, the settings of the add-on 
monitor are limited by that of the primary monitor. For example, even though your 
add-on monitor supports a resolution of up to 1680x1050, you can only configure it 
to use 1280x1024 due to the primary monitor only supports a resolution of up to 
1280x1024.  

If you change the video output to extended mode and then want to switch back to 
mirror mode, follow these steps: 

1.  Position the mouse anywhere on your computer desktop, right-click and select 

Screen Resolution

 on Win 7, 

Personalize

 > 

Display Settings

 on Vista or 

Properties

 > 

Settings

 on XP/2000. 

2.  In the 

Display

 drop-down menu, select the option with the string “

DisplayLink 

Graphics Adapter

”. 

3. Check 

the 

Multiple Displays

>

 Duplicate these displays 

on Win 7, uncheck 

the 

Extend the desktop onto this monitor 

on Vista or 

Extend my Windows 

desktop onto this monitor 

on XP/2000. 

4. Click 

OK

 to close the settings

 

screen.  

16

 

Содержание DU2800



























Отзывы: