Good Way DU2800, Руководство пользователя

Страница: 14 / 26

Mini Docking Station User’s Manual
C. Connecting the Docking Station to Computer
1. Plug the power cord of the power adaptor into the
DC IN
jack on the back of the
docking station and then connect the power adapter to a working electrical
outlet.
The
Power
indicator on the front panel glows when the docking station is
powered on.
2. Plug the square end of the USB cable into the USB upstream connector at the
back of the docking station.
3. Plug the other end of the USB cable into an available USB 2.0 port on your
computer.
Upon the USB connection, your computer will automatically complete the
remaining installation, including installing Windows built-in drivers for the USB hub.
A pop-up message will appear in the notification area indicating the installation
status. Wait for the final message indicating the driver software installation is
successful. Then the docking station is ready for use.
D. Connecting Devices to the Docking Station
Now the installation is complete. You can connect the peripherals/monitor to
appropriate ports on the docking station as required. If required, you can connect
and disconnect the peripherals/monitor any time without disconnecting the docking
station from the USB port on your computer.
Connecting Ethernet network device
1. Connect an Ethernet cable to the
Ethernet
port on the docking station.
2. Connect the other end of the Ethernet cable to your network hub, switch or
router.
Connecting DVI Monitor

For DVI model:
The equipped DVI-I (DVI-Integrated) connector transmits both
the digital and analog signals. This means it supports either of these two
connection types:

It can be connected to a DVI-D (digital) monitor using a DVI cable (not
provided)

Or, it can be connected to an analog VGA monitor using the privided DVI-I
to VGA adapter and a VGA cable (not provided).
11