PANTONE 072 C
PANTONE 123 C
2
Support Line: 0303 031 0888
For more innovative products from Good Ideas please visit:
www.shopgoodideas.com
CAUTION FOR ELECTRODE GEL PADS
Never stick two adhesive pads to each other. Keep the adhesive gel pads clean and never expose them to
high temperatures or direct sunlight or sunshine.
For protecting the gel pads longevity, always put them back onto their gel pad protectors after every single
use. Don’t touch the gel of the pads with your bare fingers, as this will reduce the gel adhesiveness and will
reduce their function and life expectation.
Don’t clean the electrode pads with hot water or any other soap or chemical. Simply rinse them with tap
water and allow to air dry.
If the electrode pads become dirty over time, the adhesive properties may decrease and the skin may
begin to feel uncomfortable and irritated. If this should occur, rinse the pads with tap water and wipe the
dirty area, this will promote and restore the adhesive gel pad properties. If too much water is applied, their
adhesiveness will be reduced.
The electrode pads have passed a Biocompatibility Test, showing no favourability to skin irritations or
allergies. Initially, the use of this device, may seem moderately discomforting. If discomfort is felt, lower
the intensity of the mode selected and discontinue if persists.
STORAGE / MAINTENANCE
1.
Use a wet cloth or neutral cleanser to wipe the unit. Do not use any volatile or flammable liquids or
corrosive fluids such as benzene, thinners or gasoline.
2.
Keep it away from magnetic fields which may impair its performance. Keep away from the reach of
children, infants and toddlers.
3.
Maintain and keep the unit far away from moisture or moist environments, high temperatures, direct
sunlight or sprinkling water like the bathroom shower.
4.
Do not attempt to dismantle the unit nor attempt to repair or rebuild the unit by yourself. This will
be in breach of the limited 1-year manufacturer’s warranty. Any repair or maintenance should be
done by a qualified electrician or the seller of this unit.
5.
If not in use for long periods, please remove the batteries in the remote control.
TROUBLE SHOOTING
EXPLANATION OF FIGURES, SYMBOLS, WARNING STATEMENTS
AND ABBREVIATIONS ON THE EQUIPMENT
Symbol represents imperative
“ATTENTION”
and consulting
the accompanying instructions or documents.
Symbol for
“BATCH CODE”.
This symbol should be with Production
Batch number and next to graph, bench code and lot number and
batch number etc.)
Examples ABC123.
Symbol for
“DATE OF MANUFACTURE”.
This symbol should be
next to number.
Production date of medical equipment (use mark in front of the
production date)
After the adoption of the CE Certification, CE marking is instructed.
The symbol vertical height, shall not be less than 5mm, clearly visible,
legible and durable. The CE Conformity assessment procedures are
made by a Notified Body. The Notified Body registration number
should be at the side of the CE mark (usually in the bottom right).
The diameter of the CE Marking should be no less than a 5mm
semicircle of the two make ups, the xxxx at the lower right corner is
the Notified Body identification number, such as 0473. All medical
products sold in the EU market must identify the “CE”. Affix the CE
mark indicates that: A. The equipment meets the basic requirements
of the MDD (Medical Device Directive); B. The equipment can be
legally sold in the market within the EU; C. The device has passed
conformity assessment procedures.
The CE mark affixed to the medical device has two variations. That is,
CE mark without Notified Body identification number and CE mark
with Notified Body identification number.
The Symbol for the Manufacturer (the
“manufacturer” tag), the tag should contain the
company name and address of the manufacturer.
Product manufacturers, EC represent the name and
address of importers or distributors.
Symbol for “Authorised Representative in the European
Community” (“EU Authorised Representative” tag), the
tag should include the company name and address of
the company authorised by the EU.
The waste products should be handled and disposed of, in
accordance with your local regulation. Do not dispose of it
with your household waste. Seek your local council advice.
BF devices.
This side up.
Fragile. Do not drop. Do not step on it.
Keep dry. Keep away from moist or wet environments.
Maximum stacking capability.
Device serial number.
Protected against objects greater than 12mm.
Protected from vertical fall of water drops.
Содержание Circulation Ultra 2661
Страница 1: ......
