28
EN
After each transport
• Place the air conditioner in an upright position�
• Allow the air conditioner to stand for at least 12 hours before operating it so that the refrigerant
can collect in the compressor� Otherwise, the compressor may be damaged!
6
Assembly
If you want to use the air conditioner in the operating modes
cooling
,
dehumidification
and
automatic
,
the exhaust hose (16) must be fitted in order for the exhaust air to be discharged from the room. No ex
-
haust air is produced in the operating mode
ventilation
�
Proceed as follows to fit the exhaust air hose to the air conditioner:
1� Pull the exhaust hose (16) apart at both ends
Pay particular attention that the fins at the beginning and end of
the exhaust hose are fully unfolded.
2� Attach the hose adapter (15) to one end of the exhaust hose� To
do this, turn the hose adapter about 3 to 4 times counterclockwise
onto the exhaust hose�
The connection should be as airtight as possible.
3� Attach the adapter for the window insert (17) to the other end of
the exhaust hose� To do this, turn the adapter for the window in-
sert about 3 to 4 times counterclockwise onto the exhaust air
hose�
The connection should be as airtight as possible.
4� Attach the hose adapter to the air outlet for exhaust air (9) by pus-
hing the hose adapter into the frame from above�
The air conditioner is now assembled.
