19
For fine adjustment, the fan can be tilted at an angle of 0°-135°.
3. Tilt the fan to the desired position from which the blower should come.
See
Figure
14.
5 Operating
5.1 Connecting
Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be disabled and the cable
not
be
damaged.
• Install the system and devices attached to it in a way that persons
cannot be injured, or objects not be damaged for example by drop-
ping
or
stumbling.
• Connect the ventilator to a protective contact socket.
Fig. 15:
Connecting
5.2
Adjusting the blower intensity
Risk of injury due to improper handling
• Operate the device only with the protective net closed and intact.
• Do not insert any fingers or objects through the protective
net.
This can lead to injuries or damages to the device.
• Keep long hair and loose clothing away from the fan.
These can be sucked in by the air flow.
• NEVER leave unattended while in operation.
The blower intensity can be adjusted in 3 steps via the 4-step switch (12,
Fig.
16):
0 = Off
1
=
Low
2
=
Medium
3
=
High
Fig. 16:
Adjusting the blower intensity
• Disconnect the fan from the mains when not in use.
Содержание 39510
Страница 91: ...91 SE ...