13
7.
IP Configure
You also can use the Ethernet to control software program. First, you should click the
button to setup network set. Next, you can read the Ethernet setting from device
and manually set to device or click the DHCP button to automatically get the IP address. After the
step of IP configuration, please restart the machine.
8.
Info
Read the software and firmware version.
9.
Refresh
This function not only can refresh the information of setting but also can reconnect this device. You
can click
button to update the control connection. A “ReConnectForm” window will pop
up for you to select the approach to connect this device.