1
INTRODUCTION
The
EX-57VAC-100E-A
4K-HDR HDMI Extender
over Single Cat.X with HDBaseT
, RS-232,
Bi-directional IR, Ethernet, PoC & ARC
boosts up your video/audio transmission distance to 100m
(330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. EX-57VAC-100E-A has new
generation technology which makes sure the HDBaseT extender can support HDMI2.0a and HDCP2.2.
EX-57VAC-100E-A also supports the most advanced 3D video format complaint with HDMI specification
and therefore guarantees the highest 3D video compatibility on the market. With only one cost- effective
Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS4,
PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI or
DVI enabled TV sets or LCD PC monitors. With the advanced design for the latest HDMI technology,
deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further
insured. EX-57VAC-100E-A is also equipped with bi-directional IR pass-through path and RS-232 serial
port control. These bonus features allow users to boost RS-232 and IR control distance up to 100m (330ft)
through only single Cat.5/5e/6 cable with HDMI signals. In addition, EX-57VAC-100E-A also supports
PoC (Power over Cable) which can power both units from either TX or RX with power supply.
The EX-57VAC-100E-A includes two units: transmitting unit EX-57VAC-100E-A-TX and receiving
unit EX-57VAC-100E-A-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR
control packets and carry the signals via one cost effective Cat.5/5e/6 cable. The receiving unit is
responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals.
EX-57VAC-100E-A offers the most convenient solution for digital signage with long distance A/V
transmission path.
FEATURES
● HDMI 2.0a compliant
● Supports 4K2K@60 4:4:4 8bits
●
Supports HDR*, which is 4K2K@60 4:2:0 10bits**
● Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 36-bit, 70m (230ft) at
4K2K@60 444 (4K-HDR Technology)
● Supports PoC (Power over Cable) which can power both units from TX or RX side with power supply
● Supports ARC on transmitter & receiver unit
● HDCP & EDID Bypass
● CEC support
● Auto equalization
● Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
● DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
● Supports full frequency IR signal from 20KHz to 60KHz
● Bi-directional IR path-through
● Integrated port for LAN/network device
● Full Duplex RS-232 control up to 115,200 bps through connector
● Wall mounting housing design for easy and robust installation
● Video latency less than 20 us.
The length depends on the characteristics and quality of the cables. Higher resolutions and
longer transmission distances require low skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ45 connectors is recommended.
* HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4 8bits is
594MHz
.
*** HDCP 2.2 & HDCP 2.3 are equivalent to end users
2
SPECIFICATIONS
Model Name
EX-57VAC-100E-A
Technical
EX-57VAC-100E-A[Tx]
EX-57VAC-100E-A[Rx]
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI 2.0a
HDCP compliance
Yes
Video bandwidth
Single-link 600MHz [18Gbps]
Video support
HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
HDMI over UTP
1080p@60 100m (330ft) [CAT5e]
Audio support
Surround sound [up to 7.1ch) or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Human body model
— ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB stack-up
6-layer board [impedance control
— differential 100Ω; single 50Ω]
IR pass-thru
Bi-directional
RS-232 support
Yes
PoC support
Yes
Input
1x HDMI / 1x 3.5mm
1x RJ-45 / 1x 3.5mm
Output
1x RJ-45 / 1x 3.5mm/ 1x SPDIF
1x HDMI / 1x 3.5mm / 1x SPDIF
In / Out
1x RS-232 / 1x RJ-45 (Ethernet)
1x RS-232 / 1x RJ-45 (Ethernet)
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector
Type A [19-pin female]
Min DIN connector
DIN-9
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
None
3.5mm connector
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical
EX-57VAC-100E-A[Tx]
EX-57VAC-100E-A[Rx]
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
153 x 73 x 21 mm [6" x 2.9" x 0.8"]
Package
TBA
Carton
TBA
Weight
Model
160g[5.6 oz]
188g[6.6 oz]
Package
TBA
Fixedness
Wall-mounting case with screws
Power supply
24V 1A DC
Power consumption
15 Watt [max]
15 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
Due to the higher power consumption on the receiving unit, we strongly suggest you
plugging power adapter from the transmitting unit to avoid system at higher temperature
level.
