Receiver unit
►
EX-57V3K-M-RX
1.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
2.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
3.
RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND (from the left side to the
right)
4.
LED:
Link LED, FW LED, HDMI out LED (from left to right)
Link LED: Link indicator LED
FW LED: [Slow Blink (1 second)] Normal mode
[Fast Blink (0.2 second)] Boot mode
[OFF] No FW
HDMI out LED: HDMI OUT indicator LED
5.
RJ45:
Plug in a Cat-6A cable that needs to be linked to the transmitting unit or receiving unit
6.
+24V DC:
Connect to a 24V DC power supply.
7.
HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable
8.
USB:
Connect to USB Host/Device (Please refer to DIP switch position)
9.
DIP Switch:
Please refer to DIP Switch Position
DIP Switch Position
Description
TX & RX
PIN#1
ON [
]
USB Port connect to USB device
OFF [
]
USB Port connect to USB host
PIN#2
ON [
]
Firmware updated mode
OFF [
]
Normal mode
-
5-
CONNECTION DIAGRAM
-
6-
