SPECIFICATIONS
Model Name
EX-57V3K-M
Technical
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI 2.0a
HDCP compliance
Yes (HDCP 2.2)
Video bandwidth
Single-link 600MHz [18Gbps]
Video support
HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
HDMI over UTP
4K2K@60 (4:4:4 8bit) 100m (330ft) [CAT 6A]
Audio support
Surround sound [up to 7.1ch] or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Human body model - ±15kV [air-gap discharge] & ±8kV [contact discharge]
IR pass-thru
Bi-directional
RS-232 support
Yes
PoC support
Yes
1x HDMI + 1x 3.5mm
1x RJ-45 + 1x 3.5mm
1x HDMI + 1x RJ-45 + 1x 3.5mm
1x HDMI + 1x 3.5mm
I/O connector
1x RS-232 + 1xUSB
1x RS-232 + 1xUSB
HDMI source control
Controllable via IR pass-through from RX to TX or TX to RX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
USB connector
Type A
3.5mm connector
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
117 x 105 x 27mm [4.6" x4.1" x2.8"]
117 x 105 x 27mm [4.6" x4.1" x2.8"]
Package
264 x 170 x 77mm [10.4" x 6.7" x 3."]
Carton
420 x 358 x 291mm [16.9" x 14.1" x 11.5"]
Weight
Model
186g[6.5 oz]
182g[6.4 oz]
Package
750g [1.65 lbs]
Fixedness
Wall-mounting case with screws
Power supply
24V DC
Power consumption
15 Watt [max]
15 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
-
3-
PANELDESCRIPTIONS
Transmitter unit
►
EX-57V3K-M-TX
1.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
2.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
3.
RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND (from the left side to the
right)
4.
LED:
Link LED, HDMI IN LED, FW LED, HDMI out LED (from left to right)
Link LED: Link indicator LED
HDMI IN LED: HDMI IN indicator LED
FW LED: [Slow Blink (1 second)] Normal mode
[Fast Blink (0.2 second)] Boot mode
[OFF] No FW
HDMI out LED: HDMI OUT indicator LED
5.
RJ45:
Plug in a Cat-6A cable that needs to be linked to the transmitting unit or receiving unit
6.
+24V DC:
Connect to a 24V DC power supply.
7.
HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
8.
HDMI LOOPOUT:
Connect to a HDMI display with a HDMI male-male cable
9.
USB:
Connect to USB Host/Device (Please refer to DIP switch position)
10.
DIP Switch:
Please refer to DIP Switch Position
DIP Switch Position
Description
TX & RX
PIN#1
ON [
]
USB Port connect to USB device
OFF [
]
USB Port connect to USB host
PIN#2
ON [
]
Firmware updated mode
OFF [
]
Normal mode
-
4-