GoMax Electronics MX-1010, Руководство пользователя

Страница: 16 / 19

~ 13 ~
4.
Problem Recommendations
No power

Check if you are using 5V DC adapter and it is firmly plugged into the
MX-1010

If you are recovering from power outage, accidentally unplug the adapter or
other power surge conditions, leave the device off for a while and then
power it on again.
No/ Erratic video

Make sure all cables are in good working condition and properly connected
to the MX-1010 and displays.

Configure the output video resolution so that it doesn―t excess the native
resolution of the display. ( in this case, the message of “out of range‖ or
“format not supported‖ is usually showed on your screen)

Make sure a video source is selected to the main channel. (press “Menu‖
and check if the first item has a video source selected or press “Source‖ to
select a video source for the main channel)
Poor quality

We suggest that don―t use T -connectors to split your video source into to
images displayed on two different screens. That will lower output video
quality. Use a distribution amplifier instead of T-connectors.

Make sure the video source is not compressed and maintains the highest
native resolution.
Image position shifted

Press “Auto‖ key on the remote control.
*Auto configuration only works at VGA and YPbPr inputs.
Wrong color

Press “F3‖ key for auto configuration.
*Auto color configuration only works at VGA and YPbPr inputs.
Advanced Engineering
Menu

Press “F1,‖ “1,‖ “2,‖ ‖3‖ keys sequentially on the remote control. An
embedded advanced engineering menu shows up.
Troubleshooting