Introduction
Types for Stationary Operation
Page 5 (40)
at
os
_cs
_r
ev
01_en
_r
ev
-c
2012
-09
-03
1.
Introduction
This user information is intended for qualified personnel who is not or
just a little familiar with the coordinate measurement technique but
who has basic PC knowledge (windows-based programs and operat-
ing systems). This user information is configured to the transfer of
knowledge of system installation, sensor settings, changing the cam-
era support and other hardware relevant information.
This user information is divided into the following sections:
•
The first page informs about important safety aspects.
•
Section 1 - Introduction
•
Section 2 and 3 describe the system variants.
•
Section 4 contains general information about the sensor.
•
Section 5 informs about how to handle the lenses.
•
Section 6 describes the control elements and LED indicators of the
sensor.
•
Section 7 describes the control elements of the optional 3D pan and
tilt head.
•
Section 8 describes the setup of the sensor.
•
Section 9 explains the wireless remote control.
•
Section 10 describes the calibration of the sensor.
•
Section 11 informs about cleaning the air filter.
•
Section 12 shows the cabling of the system as laptop and 19" PC
variants and contains notes for network administrators.
2.
Measuring System Types
ATOS COMPACT SCAN systems are available in connection with ex-
tensive equipment. The two following versions only show a selection
of possibilities.
2.1
Types for Stationary Operation
Stationary System
