golmar Vista Nexa, Инструкция по эксплуатации

Страница: 15 / 48

106
DOOR PANEL INSTALLATION
F
inal adjustments.
If after starting the system it 's considered that the audio
volume isn
't correct, proceed with the necessary
adjustments as shown . in the drawing
P
lace the nameplate labels.
Open the label holder.
Place the label and
close.
Once finished the works of wiring, configuration and
final adjustments, fix the frame in the embedding
box with the supplied screws.
C
lose the frame.
105
D
escription of the SW1 configuration dip-switch of
the sound module.
The SW1 configuration dip-switch is located at the upper left
side of the back of the module.
For dip switch settings, use the tool that is supplied with the
sound module.
DOOR PANEL INSTALLATION
Switch number 1 allows the autoswitch-on function (audio and video
communication without previous call) at the door panel that has this
switch set to the ON position In buildings with several door panels,
.
activate only one of them In systems with a general entrance door .
panel this function can be activated in one door panel of each
building
.
Set to ON the switch number 2 for monitor or telephones programming .
Once the programming is finished return the switch to the OFF
position The programming process is described on pages
. 113
(monitors) and 11 (telephones) 6 .
Set to OFF the switch number 3 in case of a master door panel Each .
system must have only one master door panel; the rest must be slaves
(ON). In systems with general entrance panel set as master one door
panel of each internal building .
Set to ON if the door panel has telecamera Set to OFF if the door panel .
doesn't have telecamera.
Set to ON , if the building
only on one door panel in each installation
has more accesses, set the rest to OFF
Set to ON to divert calls from the door panel to the porter's exchange
when the latter is active, set to OFF if this function is not desired
(Requires the use of the
digital converter and that the
CD-PLUS/R5
door panel capture is activated in the porter's exchange ).
Set to ON so that the tone volumes emitted by the door panel are ,
HIGH
or set to OFF if a tone volume is desired
NORMAL
.
Not used .
* Factory default
ON
1
2
3
4
5
6
7
8
SW1