OPERATION
When a call is received, the monitor(s) will play a melody, the LEDs will illuminate (the LED of button
will blink
rapidly) and the image from the door panel will be displayed on the master monitor without the visitor knowing. If the
call is not answered within 40 seconds the monitor returns to standby mode. If there is an M-IP-GB2 memory module,
it will automatically take a photo or record a video (for video, a 16GB Class 10 MicroSD card is required, not supplied)
and the LED of button
will blink indicating that a photo/video is pending viewing.
1.1 Receiving a call from the door panel:
Monitor description when receiving a call and during communication:
To open door 1, press the door release
button during the call: one press will activate
the lock release for 5 seconds.
8
Continued overleaf
DS-1
00:30
01
Start/stop communication.
Call: LED blinks rapidly.
Communication: LED blinks slowly.
Door panel that made the call/CCTV
camera selected.
Call/communication time elapsed.
In call.
Screen settings: brightness, colour,
contrast and monitor volume.
Select CCTV camera(s) image.
(DQ-CAM-GB2 module required).
End call/communication.
Activate lock release 2.
Activate lock release .
1
In communication.
In call/communication LEDs illuminated.
00:30
01
To open door 2, press the door release
button during the call: one press will
activate the lock release for 5 seconds.
Communication with hearing aids.
Set the hearing aid switch to
T-mode. (Vesta7 SE GB2/H only).
Note:
T
Communication with hearing aid (Vesta7 SE GB2/H monitor only):
Make sure that the hearing aid is 20cm away from the
monitor to ensure maximum audio quality during
communication with the door panel.
VESTA7 SE GB2 - VESTA7 SE GB2/H MONITOR
In call automatic image recording.
(M-IP-GB2 memory module required).