CHARACTERISTICS
- DIP switches for setting the monitor address (call code) and end of line.
- LED of button
in 'do not disturb' mode fixed / 'doctor mode' LED slow blink.
- Different ringtones to identify the origin of the call (door panel, intercom or apartment door).
- Input for call from the apartment door.
- SAR-12/24 auxiliary call repeater output (12Vdc/50mA maximum).
- 'Doctor mode' function (automatic door opening).
- Hands-free monitor.
- 7” TFT colour screen.
- Enabling the menu to be viewed when the B
is busy.
US
- Settings: Ringtone, ringtone volume, default settings (restore), about and language.
(Accessed through the 'About' option in the user menu)
Installer menu:
.
- Indicating the number of door panels (up to 4 access panels).
- Monitor as master or slave 1, slave 2 or slave 3. Up to 4 monitors per apartment.
(during auto switch-on or communication).
Screen and volume settings menu:
- Indicating the number of cameras (up to 4 CCTV cameras, DQ-CAM-GB2 module required).
- Activating intercom between apartments.
- Activating the outdoor light.
- The Vesta7 SE GB2/H monitor interacts with hearing aids equipped with T-mode, making conversation between
apartment and door panel easier.
- Playback (M-IP-GB2 module required).
- Capacitive function buttons to access and select menu functions:
- Intercom calls between apartments.
- Displaying camera pictures (DQ-CAM-GB2 module required).
- Monitor with simple installation (non-polarised 2 wire BUS).
User menu:
- Displaying door panel images.
- Lock release button 2 / in standby, it activates/deactivates the 'do not disturb' function.
- Intercom within an apartment button.
- Brightness.
- Menu access button.
- Contrast.
- Start/stop communication button and, in standby mode, it displays the image from the door panel.
- Colour.
- Monitor speaker volume (communication).
- Lock release button 1 / in standby, it activates the outdoor light.
SYSTEM OPERATION
If the call is not answered within 40 seconds, LED
will turn off and the channel will be freed.
- To establish communication, press button
on any monitor in the apartment. Door panel LED
will turn on.
- The call lasts for 40 seconds and, when received, the image appears on the master monitor without the visitor
knowing. To view the image on a slave monitor, this function needs to have been enabled on the monitor. House kit
application: the image appears on the monitor (with code 0 'house 1' or monitor with code 16 if the call is in 'house 2')
when receiving the call without the visitor being alerted.
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being
made and LED
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that a
call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by
mistake, press the button for the correct apartment and the first call will be cancelled.
- Communication will last for one and a half minutes or until button
or
is pressed again. When communication
has finished, LEDs
and
will turn off and the channel will be freed. If vocal synthesis is enabled, a 'Communication
is finished' message will indicate that the call is over.
- To open door 1 or 2, press the corresponding button
/
during the call or communication processes: one press
will activate the lock release for five seconds and LED
will also turn on for five seconds. If vocal synthesis is
enabled, a 'Door open' message will be indicated on the door panel.
If the monitor is a Vesta7 SE GB2/H with icon
on the front, make sure that the hearing aid is 20cm away from the
monitor to ensure maximum audio quality during communication with the door panel.
- A description of the function buttons can be found on page 4.
3
VESTA7 SE GB2 - VESTA7 SE GB2/H MONITOR