DESCRIPTION OF THE MONITOR
Connection terminals and DIP switch:
(
):
WHITE
HZ+
(
):
GREEN
HZ-
Configuration DIP switch:
The switches set to OFF have a zero value.
DIP 1 to DIP 5:
To set the monitor address (addresses 0 to 31).
L1, L2
: Bus connection (non-polarised).
CALL REPEATER, GND
:
Auxiliary call repeater connection
(SAR-12/24). (12Vdc/50mA maximum).
DIP 6:
Configures the end of line. Leave in the ON position in
monitors where the bus cable terminates. Set to OFF in
intermediate monitors only.
The values of the switches set to ON are shown in the table below.
HZ+, HZ-:
Door bell connection.
The monitor code is the sum of the values of the switches set to
ON.
Connection terminals:
1
2
3
ON
DIP
4
5
6
L1
L2
(RED):
CALL REPEATER
(
):
BLACK
GND
(YELLOW):
DO NOT USE
Menu entry and user settings button.
On menu screen: Display door panel image.
On menu screen: Intercom function between
apartments.
Menu buttons:
4
1
2
3
ON
DIP
4
5
6
E
: 0 + 0 + 4 + 0 +16 = 20
xample
Switch number:
1 2 3 4 5
ON: 1 2 4 8 16
Value when
Table of values
On menu screen: Divert (no function).
Menu entry and selection button.
a.
7” TFT colour screen.
b.
Microphone.
c.
Start/stop communication button.
In standby: Display door panel image.
d.
Door release button 1. In standby: Activation of outdoor
light / Press for 6 seconds to activate/deactivate the
'doctor mode' function (function code [9018] must be
activated).
e.
Lock release button 2. In standby: 'do not disturb' mode,
a 3-second press activates/deactivates 'do not disturb'
mode. If the mode is activated, icon
illuminates.
In standby: Intercom function in the apartment.
In auto spy/auto switch-on: Select other door panel(s),
camera(s) in descending mode and in carousel (if any).
g.
In standby: Enter menu.
f.
End call/communication button.
In auto spy/auto switch-on: Select other door panel(s),
camera(s) in ascending mode and in carousel (if any).
In standby: If there is a missed call, the LED blinks and
when you press you access the 'playback' menu.
k.
Configuration DIP switch.
In call/communication: Select camera(s) in ascending
mode and in carousel (if any).
h.
In standby: Enter menu.
j.
Connector fixings.
Video activated: Screen and communication volume
settings.
i.
Vertical wiring entries.
n.
Communication with hearing aids (Vesta7 SE GB2/H
only).
et the hearing aid switch to T-mode, see p. 8.
S
l.
Connector.
m.
Bus connection terminals.
On menu screen: Activate outdoor light.
1
2
3
ON
DIP
4
5
6
c
f
g
d
e
h
l
m
j
k
b
a
1
2
3
ON
DIP
4
5
6
i
j
i
n
VESTA7 SE GB2 - VESTA7 SE GB2/H MONITOR
(continued)