87
MONITOR DESCRIPTION
.
), or activate the SAR-2Plus unit if the
JP1 jumper is inserted (see page 96), this second process taking place during call
reception or communication.
If the handset is on the craddle allows to see the picture from
.
If the handset is picked up, audio and video communication can be established with
the door panel (
).
.
D
.
Regardless of the handset's position, it activates the PA and PB voltage-free contacts
The JP2 jumper must be inserted (see page 96
the door panel
the autoswitch-on function must be activated This function is disabled
if there is communication already in progress
uring call reception and communication processes, it allows lock release activation
.
.
.
F
unction push buttons
.
D
escription of the identification label
For an easiest repair, replacement or increasement
of the existing monitors, fill the identifying label
information
aster monitor
slave monitor 1 or slave monitor
no function
no function
push button code (see page
no function
.
MASTER: m
.
SLAVE: 2.
INTER:
A1:
CODE:
82).
STAIR: .
.
.
.
E
nd of line and amplifying the video signal
The Sw2 configuration dip switch is located
on the rear of the monitor
.
88
CONNECTION BLOCK DESCRIPTION
The Bus In and Bus Out terminals facilitate a daisy chain connection of other monitors or telephones
If the monitor is not placed on the connection block, subsequent daisy chain units will not be
powered
.
.
.
D
escription of the RCPL-V2Plus monitor connection block
a.
(x4).
b.
(x2).
c. .
d. .
e. .
f.
:
Wall attachment holes
Monitor attachment hooks
Vertical wiring input
Attachment clip
Central wiring input
Installation terminals
Digital communication bus input to monitor
Digital communication bus output to additional monitor/telephone
Door bell push button connection
Voltage free contacts
.
.
.
.
- Bus In:
- Bus Out:
- HZ:
- PA, PB:
a
a
b
b
f
e
d
c
PB
PA
REF:
RCPL-V2PLUS
LOTE:
CODE:
11784084
Colocar la parte superior de la regleta a 1,60m. del suelo.
Place the top part of the monitor connector at 1,60m. from the floor.
50mm.
50mm.
Presionar para abrir.
Press to open.
BUS
IN
BUS
OUT
HZ
CODIGO / CODE
SLAVE
MASTER
INTER
A1
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
PLATEA V2PLUS
REF.
11784042
COD.
PUERTA
DOOR
ESCALERA
STAIR
PISO
FLOOR
VERSIÓN:
Nº SERIE:
00000000000
X.XX
00000000
Set to ON to configure with the end of line resistor in monitors
where bus wires terminate
Set to OFF only for intermediate monitors
.
.
No function.
No function.
No function.
Factory default
Set to On the monitors:
That distance is more than 80 m. from door panel or multiplexer.
Connected from output No.17 of the disributors or with multiplexer from
output No. 25 of the distributors.
In an installation without distributors (daisy chain) from monitor No.9.
Set to OFF the rest of monitors, and with a multiplexer the monitors con-
nected in riser without distributors (daisy chain).
er
